您当前的位置是:首页 >> 新闻动态 >>

关于AH渣浆泵轴承装配一般事项
作者: 更新日期:2022-09-23 16:27 浏览次数:
关于AH渣浆泵轴承装配一般事项:
装配新轴承时,要洗净轴承体、端盖、轴和其它装配部件,以防止污物、防护涂层或润滑油粘附到轴承上。不要洗去制造厂上到轴承的润滑剂,制造厂使用高级无酸润滑剂(其内部没有那些可能引起腐蚀的化学剂和杂质)。所添加的任何润滑剂必须绝对干净,为此务请采取下列措施:
 
1、滑筒加盖,以防污物进入。
 
2、取润滑剂用专用工具,不要使用木刮板而要用钢刀或油灰刀,因为它们可以擦的光滑和干净。
 
3、假若采用润滑枪,则油嘴和润滑部件要保持干净。
 
渣浆泵轴承是渣浆泵轴承组件重要组成部分,也是核心部分,这一部分的安装直接影响渣浆泵是否能够正常运转,以及使用寿命

General matters about bearing assembly of AH slurry pump:
When assembling a new bearing, clean the bearing body, end cap, shaft and other assembly parts to prevent dirt, protective coating or lubricating oil from adhering to the bearing. Do not wash the lubricant from the manufacturer to the bearing. The manufacturer uses a high-grade acid free lubricant (there are no chemicals and impurities that may cause corrosion inside). Any lubricant added must be absolutely clean, so please take the following measures:
1. The sliding cylinder is covered to prevent dirt from entering.
2. Use special tools to take lubricant, not wood scraper, but steel knife or putty knife, because they can be wiped smooth and clean.
3. If a lubricating gun is used, keep the nozzle and lubricating parts clean.
The bearing of the slurry pump is an important component and core part of the bearing components of the slurry pump. The installation of this part directly affects the normal operation and service life of the slurry pump