您当前的位置是:首页 >> 新闻动态 >>

导致潜水渣浆泵漏水的原因有哪些
作者: 更新日期:2022-05-03 14:33 浏览次数:
潜水渣浆泵多用于环保、煤炭、电力等行业,同时它在某一些行业也起到不小的作用,在应用的过程中,难免会发作一些小毛病,那么我们可能会纠结到底是什么缘由所形成,特别是漏水现象,那么产生的此现象的缘由在哪呢?
  1、操作人员给冷却水散热器内参加的冷却水是海水,潜水渣浆泵形成柴油机内部水道及外接口损坏。所以,运用柴油机时一定要严厉按柴油机的各项规则停止操作。
  2、操作人员给散热器内参加的防冻液腐蚀性较强,致使柴油机水道部件损坏。
  3、密封圈磨损或老化,招致密封面封不住,产生漏水。
  潜水渣浆泵在运用的时分一定要留意,需求依据它的规则程序来合理的运转、运用、以及维护,或许会由于运用不当而形成设备的损坏或者是呈现毛病,因而在运用时,假如想要防止漏水这一现象,那么一定要依照它的规范来工作。

Submersible slurry pump is mostly used in environmental protection, coal, electric power and other industries. At the same time, it also plays a great role in some industries. In the process of application, some small faults will inevitably occur. Then we may wonder what causes it, especially water leakage. What is the reason for this phenomenon?
1. The cooling water added into the cooling water radiator by the operator is seawater, and the submersible slurry pump causes damage to the internal water channel and external interface of the diesel engine. Therefore, when using the diesel engine, it must be operated in strict accordance with the provisions of the diesel engine.
2. The antifreeze added into the radiator by the operator is highly corrosive, resulting in damage to the water channel components of the diesel engine.
3. The sealing ring is worn or aged, resulting in the sealing surface can not be sealed and water leakage.
When using the submersible slurry pump, we must pay attention to the reasonable operation, use and maintenance according to its specified procedures. It may cause equipment damage or failure due to improper use. Therefore, if you want to avoid the phenomenon of water leakage, you must work according to its standards.