您当前的位置是:首页 >> 新闻动态 >>

渣浆泵轴承装配注意事项
作者: 更新日期:2022-02-16 13:02 浏览次数:
在渣浆泵轴承装配之前先阅读阐明书。
 
关于渣浆泵轴承装配普通事项:
渣浆泵装配新轴承时,要洗净轴承体、端盖、轴和其它装配部件,以避免污物、防护涂层或光滑油粘附到轴承上。不要洗去制造厂上到轴承的光滑剂,制造厂运用高级无酸光滑剂(其内部没有那些可能惹起腐蚀的化学剂和杂质)。所添加的任何光滑剂必需绝对洁净,为此务请采取下列措施:
 
1、滑筒加盖,以防污物进入。
 
2、取光滑剂用专用工具,不要运用木刮板而要用钢刀或油灰刀,由于它们能够擦的润滑和洁净。
 
3、假若采用光滑枪,则油嘴和光滑部件要坚持洁净。
渣浆泵轴承装配的意义
渣浆泵轴承装配是十分关键的,这是渣浆泵运转的转子局部,轴承的质量以及装配工艺能否合格极大的影响渣浆泵的性能以及能耗损失。
 
我们应该尽量的细致且依托经历去防止渣浆泵轴承毛病的发作,从而保证渣浆泵的运用,并且保证渣浆泵运用寿命。

Read the instructions before the slurry pump bearing assembly.
General matters about bearing assembly of slurry pump:
When assembling a new bearing for the slurry pump, clean the bearing body, end cover, shaft and other assembly parts to prevent dirt, protective coating or lubricating oil from adhering to the bearing. Do not wash the lubricant from the manufacturer to the bearing. The manufacturer uses high-grade acid-free lubricant (there are no chemicals and impurities that may cause corrosion). Any lubricant added must be absolutely clean. For this purpose, please take the following measures:
1. Cover the sliding cylinder to prevent dirt from entering.
2. Use special tools to take lubricant. Do not use wood scraper, but steel knife or putty knife, because they can wipe smooth and clean.
3. If a lubricating gun is used, the oil nozzle and lubricating parts shall be kept clean.
Significance of bearing assembly of slurry pump
The bearing assembly of slurry pump is very critical, which is the rotor part of slurry pump operation. The quality of bearing and whether the assembly process is qualified greatly affect the performance and energy consumption loss of slurry pump.
We should try to be careful and rely on experience to avoid the occurrence of bearing failure of slurry pump, so as to ensure the use of slurry pump and the service life of slurry pump.