- 产品展示
- 渣浆泵
- 多级泵
- 脱硫泵
- 混流泵
- 双吸泵
- 清水泵
- 排污泵
- 泥浆泵
- 灰渣泵
- 锅炉给水泵
- 液下泵
- 化工泵
- 纸浆泵
- 管道泵
- 卧式直联泵
- 真空泵
- 泡沫泵
- 自吸泵
- 水泵配件
- 潜水渣浆泵
- 压滤机入料泵
- KQSN上海凯泉吸泵
- 襄樊525脱硫泵
- 联系我们
- 河北巨强泵业有限公司
- 联系人:赵经理
- 手机:13472265816
- 电话:0312-3596262
- 地址:保定市安国市石佛镇石佛村
您当前的位置是:首页 >> 新闻动态 >>
潜水渣浆泵
作者:巨强泵业
潜水渣浆泵根据大数据显示,被市场关注越来越高。关注度不断提高。反映出市场对潜水渣浆泵的关注,其发展趋势不断向好。
为什么潜水渣浆泵发展趋势不断向好呢?
根据我公司分析,主要是因为其使用方便、高效。
1.高质量一次性润滑轴承(进口NTN轴承)无忧运转。
2.密封监视在电动机与泵盖之间的油室里注入润滑油,作为保护区,通过传感器进行密封监视,一旦漏水,立即关机。
3.大通道的水力部件设计,保证一定大小的颗粒无堵塞通过,减少故障。
4.电动机转轴采用不锈钢材质,转子进行动平衡检测,更加完美。
5.双端面机械密封,材质为钛化硅/钛化硅(或钛化钨/钛化钨),保证水泵长期可靠的工作。
According to big data, submersible slurry pump is attracting more and more attention from the market. The attention has been constantly raised. It reflects the market's concern for submersible slurry pump, and its development trend continues to improve.
Why is the development trend of submersible slurry pump getting better?
According to our analysis, it is mainly because it is convenient and efficient to use.
1. High quality one-time lubricated bearing (imported NTN bearing) operates without worry.
2. Sealing monitoring Inject lubricating oil into the oil chamber between the motor and the pump cover as a protection area, and conduct sealing monitoring through the sensor. Once water leaks, shut down the machine immediately.
3. The hydraulic components of the large channel are designed to ensure that particles of a certain size can pass through without blocking and reduce failures.
4. The motor shaft is made of stainless steel, and the rotor is tested for dynamic balance, which is more perfect.
5. Double end mechanical seal is made of silicon titanide/silicon titanide (or tungsten titanide/tungsten titanide) to ensure long-term reliable operation of the pump.
- 上一篇:章鼓渣浆泵配件
- 下一篇:关于AH渣浆泵轴承装配一般事项