- 产品展示
- 渣浆泵
- 多级泵
- 脱硫泵
- 混流泵
- 双吸泵
- 清水泵
- 排污泵
- 泥浆泵
- 灰渣泵
- 锅炉给水泵
- 液下泵
- 化工泵
- 纸浆泵
- 管道泵
- 卧式直联泵
- 真空泵
- 泡沫泵
- 自吸泵
- 水泵配件
- 潜水渣浆泵
- 压滤机入料泵
- KQSN上海凯泉吸泵
- 襄樊525脱硫泵
- 联系我们
- 河北巨强泵业有限公司
- 联系人:赵经理
- 手机:13472265816
- 电话:0312-3596262
- 地址:保定市安国市石佛镇石佛村
您当前的位置是:首页 >> 新闻动态 >>
液下立式渣浆泵与潜水渣浆泵的区别
作者:巨强泵业
很多用户包括渣浆泵新的从业人员经常分不清液下立式渣浆泵与潜水渣浆泵的区别,在称号上液下和潜水似乎很近似,但是有实质区别。
渣浆泵厂家分别引见液下立式渣浆泵和潜水渣浆泵的概念、特性,然后停止比照,剖析区别。
一、液下立式渣浆泵的概念及特性
所谓液下渣浆泵,指的是渣浆泵工作时一局部(非全部)是要浸入页面以下的,泵头局部在液下,电机一端在液上。业内人士为了辨别SP和ZJL两种渣浆泵,普通SP称为液下渣浆泵。如图
所谓立式渣浆泵,指的是泵轴与程度位置垂直就是立式渣浆泵,不从行业习气来说,潜水渣浆泵也属于立式渣浆泵,但在业内特别是石家庄渣浆泵范畴,立式渣浆泵普通通指ZJL型渣浆泵。
其实SP液下渣浆泵和ZJL立式渣浆泵都属于液下立式渣浆泵,此类泵的最大特性是不需求任何轴封,最大液下深度普通在3米以内,经过我公司多年潜心研讨目前最大液下深度可达10米。
二、潜水渣浆泵的概念及特性
潜水渣浆泵(ZJQ渣浆泵)从构造来说,泵轴与程度位置普通也是垂直的,属于立式渣浆泵,但是其工作时,泵的整体,包括电机局部都是在液面以下的,故称“潜水”。
在运用性上来说,潜水渣浆泵较液下立式渣浆泵愈加便当,直接将其置入浆体中即可。
该泵是由电机与泵两局部组成,二者经过油隔离室及机械密封组件隔开,属机电一体化产品,电机与泵合用同一轴(转子),构造紧凑。
三、液下立式渣浆泵与潜水渣浆泵的区别
1、液下立式渣浆泵并非全部浸入液下,而潜水渣浆泵可全部浸入亦可局部浸入;
2、液下立式渣浆泵工作时需求固定装置,在液面局部必需哟可供装置的平台,而潜水渣浆泵不需求装置平台,直接浸入浆体中即可运转;
3、液下立式渣浆泵普通运转深度为3米,经我公司独有技术改良最大也只能到达10米,而潜水渣浆泵工作深度目前最高可达25米;
4、液下立式渣浆泵运转深度普通遭到轴长和吸入管限制,潜水渣浆泵运转深度主要受密封抗压才能限制,密封安装请求严厉。
Many users, including slurry pumps, and new employees often fail to distinguish the difference between submerged vertical slurry pumps and submersible slurry pumps. The names of submerged and submersible slurry pumps seem to be very similar, but there are essential differences.
The slurry pump manufacturers respectively introduce the concepts and characteristics of submerged vertical slurry pump and submersible slurry pump, and then compare and analyze the differences.
1、 Concept and characteristics of submerged vertical slurry pump
The so-called submerged slurry pump refers to that part (not all) of the slurry pump is immersed below the page when it works. The pump head is under the liquid and one end of the motor is on the liquid. In order to distinguish SP and ZJL slurry pumps, insiders generally call SP submerged slurry pump. As shown in the figure
The so-called vertical slurry pump refers to the vertical slurry pump when the pump shaft is perpendicular to the horizontal position. Not from the industry habit, the submersible slurry pump also belongs to the vertical slurry pump, but in the industry, especially in the field of Shijiazhuang slurry pump, the vertical slurry pump generally refers to ZJL slurry pump.
In fact, both SP submerged slurry pump and ZJL vertical slurry pump belong to submerged vertical slurry pump. The biggest feature of this kind of pump is that it does not need any shaft seal, and the maximum submerged depth is generally within 3M. After years of painstaking research by our company, the maximum submerged depth can reach 10m.
2、 Concept and characteristics of submersible slurry pump
In terms of structure, the submersible slurry pump (zjq slurry pump) is generally vertical between the pump shaft and the horizontal position. It belongs to a vertical slurry pump, but when it works, the whole pump, including the motor, is below the liquid level, so it is called "submersible".
In terms of usability, the submersible slurry pump is more convenient than the underwater vertical slurry pump, which can be directly put into the slurry.
The pump is composed of motor and pump, which are separated by oil isolation chamber and mechanical seal components. It is a product of mechatronics. The motor and pump share the same shaft (rotor), and the structure is compact.
3、 Difference between submerged vertical slurry pump and submersible slurry pump
1. The submerged vertical slurry pump is not fully immersed in the liquid, while the submersible slurry pump can be fully immersed or partially immersed;
2. When the submerged vertical slurry pump works, it needs to be fixed and installed. The liquid level part must have a platform for installation, while the submersible slurry pump does not need to install a platform and can operate directly in the slurry;
3. Generally, the operating depth of the submerged vertical slurry pump is 3M, which can only reach 10m after the unique technical improvement of our company, while the working depth of the submersible slurry pump can reach 25m at present;
4. The operating depth of the submerged vertical slurry pump is generally limited by the shaft length and suction pipe. The operating depth of the submersible slurry pump is mainly limited by the sealing compression capacity, and the sealing device is strictly required.
- 上一篇:开挖能源用什么样耐磨抽沙泵
- 下一篇:卧式渣浆泵最新详细介绍